Lanier 5813 - Manual (Page 205)

If You Cannot Make Copies as You Want
189
6
If You Cannot Make Copies as You Want
Problem Cause Action
Copies appear dirty. The image density is too dark. Adjust the image density. ⇒
P.28 “Adjusting Copy Image
Density”.
Adjust the background densi-
ty.
⇒ P.142 “Image Adjust-
ment”.
The exposure glass or docu-
ment feeder belt is dirty. Clean them. ⇒ P.230 “Main-
taining Your Machine”
The reverse side of an original
image is copied. The image density is too dark. Adjust the image density. ⇒
P.28 “Adjusting Copy Image
Density”.
If you select Black & White
Copy mode or Single Color
mode, place a black paper in
the backside of the original
and select Auto Image Densi-
ty mode.
Lighten the background den-
sity.
⇒ P.142 “Image Adjust-
ment”.
A shadow is copied when
copying a pasted original. The image density is too dark. Adjust the image density. ⇒
P.28 “Adjusting Copy Image
Density”.
Adjust the background densi-
ty.
⇒ P.142 “Image Adjust-
ment”.
Place the original in a differ-
ent direction.
Put mending tape on the
bound part.
Copies are too light. The original has a low contrast
image. Adjust the image density. ⇒
P.28 “Adjusting Copy Image
Density”.
The image density is too light.
Damp or rough grain paper is
used Use dry paper without rough
grain.
Cattleya2-2_FM.book Page 189 Thursday, December 14, 2000 8:17 PM