LSI Ultra160 - Manual (Page 23)

Connecting SCSI Peripherals 2-7
Figure 2.5 shows an example of an external SCSI connection
to a single external SCSI device. If you have the correct cable,
it matches the external connector. Termination occurs on the
last SCSI device. See
Section 2.3, “Terminating the SCSI Bus,”
for more information about SCSI bus termination.
Figure 2.5 External SCSI Connection to an External SCSI Device
Step 3. Chain any additional SCSI devices together with shielded
external SCSI cables.
Figure 2.6 shows an example of multiple external SCSI devices
that are chained together.
External
Connector
Terminator