Life Fitness 95Te User Manual

Page 8

Advertising
background image

PRE-OPERATION CHECKLIST

Ensure that all fasteners are tight.
Make sure the STRIDING BELT is properly tensioned and aligned according to the Operation Manual.
Confirm the wax bag has been installed.
Check the operation of the STOP switch and tether switch assembly.

(See Operation Manual.)

Confirm the display console is set to English or Metric units.

(See Optional Settings ENG/MET in Operation Manual.)

Refer to the Operation Manual for real time clock setting.

Read the entire Operation Manual before using the treadmill.

LISTE DES VÉRIFICATIONS À EFFECTUER AVANT LA MISE EN MARCHE

Vérifiez si tous les dispositifs de fixation sont serrés.
Assurez-vous que le TAPIS est bien tendu et aligné, conformément aux instructions du manuel

d’utilisation.

Assurez-vous que le sac de cire a été installé..
Vérifiez le fonctionnement de l'interrupteur d'ARRÊT et reliez-le

(cf. Manuel de l'utilisateur).

Vérifiez si la console d’affichage est sur le système métrique ou anglais.

(Référez-vous aux réglages facultatifs relatifs aux systèmes de mesure dans le Manuel de
l’utilisateur.)

Consultez le Manuel de l’utilisateur pour le réglage de l’horloge en temps réel.

Lisez le Manuel de l’utilisateur dans son intégralité avant d’utiliser le tapis roulant.

Before attempting to operate your Treadmill, it is imperative that you familiarize yourself with the contents of the
Operation Manual. If your Life Fitness treadmill does not respond as described in the OPERATION MANUAL contact
the nearest Life Fitness Service Center as listed in the OPERATION MANUAL.

Life Fitness Customer Support Services

(800) 351-3737 or (847) 451-0036

Prior to your call, please be sure you have located and noted the

MODEL NUMBER & SERIAL NUMBER.

The Model & Serial number information of your Life Fitness Treadmill is contained in a label

located on the front of the unit.

©2004 Life Fitness, a division of Brunswick Corporation. All rights reserved. Life Fitness, Lifepulse, FlexDeck and Smart Stop are
trademarks of Brunswick Corporation.
Polar is a registered trademark of Polar Electro, Inc.

MO51-00K58-A115

1.04

Advertising
This manual is related to the following products: