Lennox Hearth M5390 - Manual (Page 9)

7
English
4. Setting up your mobile phone
Setup
Pairing your headset with your mobile phone
NOTE: Before use, please charge your headset (see 3.4).
Before using your Jabra M5390 Multiuse headset with a mobile phone, you need to pair it with
your mobile phone.
•
Make sure the headset is off.
•
During start-up keep pressing the Answer/End button for three seconds. Alternatively remove
the snap-on cover and press the reset button on the headset for three seconds. The visual
indicator on headset will light constant blue. (see 9.1)
•
Set your Bluetooth ® phone to ‘discover’ the Jabra M5390 Multiuse headset:
o Follow your phone’s User Manual. This usually involves going to a ‘setup,’ ‘connect’ or ‘Bluetooth’
menu on your phone and selecting the option to ‘discover’ or ‘add’ a Bluetooth ® device.
o Your phone will find the Jabra M5390 Multiuse headset and ask if you want to pair with it.
•
Accept pairing by pressing Yes/OK (or similar) on the phone and confirm with the passkey or
PIN ‘0000’ (4 zeros).
•
Your phone will confirm when pairing is complete. If pairing is unsuccessful, repeat the steps
above. Some mobile phones require manual connection after pairing. Note that on some mobile
phones, the headset has to be set as “Trusted device”.
NOTE: If you accidentally put the headset into pairing mode, tap the Answer/End button to exit
pairing mode.
IMPORTANT: The same headset can be paired with multiple mobile phones. However, if you
have multiple mobile phones paired, switched on and within range of the headset, the headset will
not be able to connect to the base. It is only possible to be connected to one mobile phone and the
headset base at a time. To be able to connect to the headset base, only have one paired mobile
phone turned on and within range of the headset.