LevelOne FNS-1000 - Manual (Page 8)

USB Devices
You can insert either USB HDD or USB Memory Disk (Flash Memory Disk) to USB port at any time.
Once the “USB” LED on the front panel comes on and stays on, the USB device is available for use.
For USB HDD, the NAS can recognize FAT and NTFS file format.
Removing a USB device - Method A
1. Press the USB Eject button on the rear panel. The NAS will beep.
2. Wait for the "USB" LED to start blinking slowly.
3. Remove the USB device.
Removing a USB device - Method B
1. Run the Windows utility
2. Select "Safely Remove Drive"
3. Select the desired NAS
4. Click the "Eject" button.
5. Wait for the "USB" LED to start blinking slowly. (The Windows program will also display a message
when it is safe to physically detach the USB device.)
6. Remove the USB device.
Note: If the USB device is not removed, it will not be re-connected. You must remove and re-insert the
USB device to have it re-connected.
Page 6