Lexmark IBM 9077 - Manual (Page 60)

42 IBM 9077 SP Switch Router: Get Connected to the SP Switch
2.4.1.2 DependentAdapter Attributes
The attributes of the DependentAdapter class are described in Table 3:
Table 3. DependentAdapter Attributes
The attributes of the DependentAdapter class are described in detail as
follows:
AttributeDescription
node_numberThis user-supplied node number represents the node position
of an unused SP Switch port to be used by the SP Switch
router adapter.
netaddrThis is the IP address of the SP Switch Router adapter.
netmaskThis is the netmask of the SP Switch Router adapter.
2.4.1.3 Additional Attributes
As Table 4 shows, additional attributes are added to the Syspar_map_class
and the Switch_partition classes:
Table 4. Additional SDR Attributes
Details of these attributes follow:
User Defined System Defined
node_number -
netaddr -
netmask -
Syspar_map class Switch_partition class
... ...
node_type switch_max_ltu
switch_link_delay