Lexmark IBM 9077 - Manual (Page 66)

48 IBM 9077 SP Switch Router: Get Connected to the SP Switch
2.4.2.5 The enadmin Command
The
enadmin command is used to change the status of the SP Switch router
adapter in the GRF and can also be executed using smit. The fast path for
smit is
manage_extnode . The command options are shown in Table 10.
Table 10. enadmin Command Options
Flags SMIT Option Description
-a Actions to be
performed on
the extension
node Either reset or reconfigure . A reset is sent to the
extension node SNMP Agent to change the
target node to a down state (not active on the SP
Switch). A
reconfigure is sent to the extension
node SNMP Agent to trigger reconfiguration of
the target node, which causes the SNMP Agent
to request new configuration parameters from
the SP extension node SNMP Manager, and to
reconfigure the target node when the new
parameters are received.
Node number This is the node number the extension node
logically occupies in the RS/6000 SP.