Pioneer RM V2550BU - Manual (Page 19)

9
GENERAL SPECIFICATIONS
No. Name Type Function
1 AC inlet Connect the power cord here.
2 AC outlet Connect other multi projection units here. Not linked to main
power switch. (*1)
3 Main power switch Seesaw switch Turns the power supply to the set on and off. When on, the set
is set to the mode stored in the last memory (standby or
power on).
4 Fuse holder The fuse is in here. Only service personnel should touch this.
NOTE) 1. Refer to “(13) Power supply 3 connection”.
Power Supply Panel
[Fig. 2-1-1]