Pioneer RM V2550BU - Manual (Page 50)

40
INSTALLATION AND ASSEMBLY
4. ASSEMBLING THE SYSTEM
(1) System assembly flowchart
Fix the adjusters.
<See P. 48.>
Fix a cabinet on the projection stand.
<See P. 43.>
With a 9-screen system, connect the
cabinet for the third stage after
connecting that for the second stage.
<See P. 58.>
Do you install the system up against
the wall?
<See P. 48.>
Perform the system wiring on the
rear.
<See P. 48.>
Check power supply operation, etc.
<See P. 48.>
Arrange the required number of
cabinets horizontally and connect
them between each other.
<See P. 44.>
Connect the screen frames vertically.
<See P. 49.>
Hook the screens on the cabinets (all).
<See P. 50.>
Fix the screen frames and cabinets.
<See P. 53.>
Connect the
cabinet for the
second stage.
<See P. 46.>
Move the system
(up against the wall).
<See P. 48.>
3-stage configuration
2-stage configuration
YES
NO
Prevent tumbling down and fix the
anchors.
<See P. 26.76.>