Panasonic TX-43P800X - Manual (Page 23)

23
Setup Adjustment
1
COLOUR SYSTEM
During AV mode, COLOUR SYSTEM is displayed.
If a clear picture with current colours cannot be obtained when
a Broadcast or AV signal is received, then the colour system
will change as shown.
PAL, SECAM and NTSC 3.58 are different colour signal broadcast
transmission systems applicable to differing countries. NTSC 4.43
is a trick playback mode used in special VCR to playback NTSC
recorded video tapes through PAL television equipment.
AUTO PAL
NTSC3.58 NTSC4.43
SECAM
TELETEXT
OFF TIMER
CHILD LOCK
CH COLOUR SET
3D-COMB ON
ILLUMINATION ON
BLUE BACK ON
OFF
OFF
FASTEXT
SETUP MENU
PICTURE SHIFT
TUNING MENU
LANGUAGE
OWNER ID
CONVERGENCE ON
SETUP MENU
TEXT SELECT ENGLISH
CHILD LOCK
If the Child-Lock function is set ON, picture and sound of the TV/AV
mode being viewed will disappear and a Black screen will appear.
During AV mode, the appearance of the SETUP MENU will differ from that of the TV mode, with the following function adjustments
becoming available.
Press to display the SETUP MENU.
SET UP
2 Press to select the desired function.
Press to adjust or change the
function.
3
Press to go back to watching TV.
TV/AV
Switches the TV off within a preset time which you can choose
from between 0 to 90 minutes in 15 minutes intervals.
OFF
60 75 90
30 15 45
OFF TIMER
CH COLOUR SET
Colour density varying between broadcast channels can be
adjusted to three levels for each reception channel.
BLUE BACK
You can choose Blue Back display ON or OFF when there is no signal.
Select “ON” to illuminate the ILLUMINATION LIGHT on the front
panel. Otherwise, select “OFF”.
ILLUMINATION
You can choose 3D-COMB function ON or OFF. If the 3D-COMB
function is ON, dot interference or cross colour will be reduced.
Note: Not available in component and RGB input.
3D-COMB
PICTURE SHIFT
For use as a screen saver, this function changes the entire
picture position (shift) approximately 2 mm every 15 minutes.
VCR/GAME
Reproduction of irregular signals, such as certain TV games
and rental video tapes, may be improved.
LANGUAGE
When you first install the TV, the On Screen Display language is
set according to your choice of region. LANGUAGE lets you change
the language used for On Screen Displays (refer to page 5).
[ for TX-43/51P800H ]
English Chinese
[ for TX-43/51P800X ]
English Arabic
SELECT
CHANGE
TV / AV - EXIT
COLOUR SYS
FLICKER REDUC.
3D-COMB
PICTURE SHIFT
TEXT SELECT
OWNER ID
CONVERGENCE
LANGUAGE
ON
ON
ON
ENGLISH
PAL
SETUP MENU
TELETEXT
OFF TIMER
CH COLOUR SET
BLUE BACK
ILLUMINATION
VCR / GAME OFF
OFF
OFF
OFF
FASTEXT
CHILD LOCK OFF
SETUP MENU
FLICKER REDUCTION
Lets you control any picture movement. Set to ON to activate
motion compensation, to smooth the image and get rid of picture
movement. Set to Off to have no flicker reduction at aIl,
occasional broadcasts may benefit from using this setting.
ON OFF