Planar LX1200 - Manual (Page 2)


Installation
Touchscreen Setup - 1.
Refer to the User’s Guide for touch set-up •
Latest t • ouchscreen drivers are available at
http://apps.planar.com/downloads/touchscreen/
SoftKey Set-up - 2.
Refer to the User’s Guide for SoftKey set-up instructions. •
Recommended Mounting - 3.
Planar recommends an approved mount for in-vehicle use. •
Cable Conn 4. ections -
(Sold Separately. Refer to the diagram below). To ensure reliability strain relief as needed.
USB Type B Upstream 1.
VGA Video Cable 2.
12V Power Input 3.
3.5mm Audio Input Cable 4.
Remote PC Shutdown/Start Control Cable 5. (See User’s Guide)
Power Up - 5.
Connect the video an • d power cables. The unit will display a test screen
as soon as power is applied.
Use 5A fuse and a timer switch to avoid draining the battery. •
Power up th • e computer. See the User’s Guide for the LX1200 at
www.planar.com/support for advanced set-up instructions.
Cleaning - 6.
Use a clean cloth to cle • an the display. If cleaning fl uid is required, mild
detergent or IPA can be used, if applied to the cloth fi rst.
Keyboard
(optional)
Computer
USB
VGA
Remote PC Shutdown/Start
Audio
12V
Power Source
ATTENTION: Install touchscreen driver prior to making cable connections to your PC.