Panasonic UF-585/595 - Manual (Page 66)

64
Fax / Tel Auto Switching Mode
When your machine is set to this mode, your machine will switch to document reception or voice communication
automatically.
Setting the Fax / Tel Auto Switching Mode
Operation of Fax / Tel Auto Switching Mode
(see Note 1) (see Note 2)
1 Change Fax Parameter No. 15 (IN MODE) to 2 : Fax / Tel SW. (See page 37)
2
Confirm that the display is as shown to the right.
1 Your machine will answer the call when a call is received, then distinguish whether it is
a voice or fax call.
2a
If it is a Fax call,
Your machine begins to receive the
documents.
2b
If it is a Voice call,
Your machine begins to signal (ringing)
through the machine's speaker for your
attention. (See Note 1)
3b Lift the handset of the External Telephone
and press .
4b Begin the conversation .
1. The length of time the machine signals can be changed by Fax Parameter No.18 (OP CALL TIMER) (see page 38).
2. To adjust the Ringer Volume refer to page 25.
OUT MAR-12-1999 15:00
RCV MODE=FAX/TEL 00%
STOP
Receiving Documents
Note: