Philips GOGEAR SA1MXX02P - Manual (Page 17)

18
5
When the display shows Update
completed, click OK.
6
Disconnect the Digital Audio Player from
the computer.
The Digital Audio Player restarts after »
the firmware is updated and is ready
for use again.
9 Update the
Digital Audio
Player
The Digital Audio Player is controlled by an
internal program called firmware. Newer
versions of the firmware may have been
released after you have purchased the Digital
Audio Player.
The software program called Philips Device
Manager can use your computer to check for
firmware updates that are available on the
Internet.
Install Philips Device Manager on your
computer from the Digital Audio Player or
download the latest version from www.philips.
com/support.
Note
Your music files are not affected by a firmware
•
update.
Manually verify / update
firmware
1
Ensure that your computer is connected
to the Internet.
2
Connect the Digital Audio Player to the
computer (see section Connect and
charge for instructions).
3
On your computer, click Start >
Programs > Philips Digital Audio Player
> GoGear Mix Device Manager to
launch Philips Device Manager.
4
Click Update
» Philips GoGear Mix Device Manager
checks for updates and installs new
firmware from the Internet, if available.
EN