Setting date/time (clock set), Changing the clock setting – Panasonic DMC-FS12 EN User Manual
Page 14
VQT2D42 (ENG)
14
Setting Date/Time (Clock Set)
• The clock is not set when the camera is shipped.
Turn the camera on.
• The [PLEASE SET THE CLOCK] message appears.
(This message does not appear in [PLAYBACK]
mode.)
A [MENU/SET] button
B Cursor buttons
Press [MENU/SET].
‚: Cancel without setting the clock.
Press [MENU/SET] to set.
• After completing the clock settings, turn the camera off. Then turn the camera back on,
switch to Recording mode, and check that the display reflects the settings that were
performed.
• When [MENU/SET] has been pressed to complete the settings without the clock having
been set, set the clock correctly by following the “Changing the clock setting” procedure
below.
Select [CLOCK SET] in the [REC] or [SETUP] menu, and press
1.
• It can be changed in steps
3
and
4
to set the clock.
• The clock setting is maintained for 3 months using the built-in clock battery even
without the battery. (Leave the charged battery in the unit for 24 hours to charge the
built-in battery.)
Press
2/1 to select the items (year,
month, day, hour, minute, display
sequence or time display format), and
press
3/4 to set.
Changing the clock setting
ON
OFF
/SET
MENU
DMC-FS12&FS62P-VQT2D42_eng.book 14 ページ ２００９年３月２５日 水曜日 午前１１時１７分