Panasonic DMC-FS12 EN - Manual (Page 18)

VQT2D42 (ENG)
18
[REC] mode:
ñ
Taking pictures using the automatic function
( ñ : Intelligent Auto Mode)
The camera will set the most appropriate settings to match the subject and the recording
conditions so we recommend this mode for beginners or those who want to leave the
settings to the camera and take pictures easily.
• The following functions are activated automatically.
– Scene detection/[STABILIZER]/[INTELLIGENT ISO]/Face detection/Backlight
Compensation/Digital Red-eye Correction
Slide the [REC]/[PLAYBACK] selector switch to [!], and then press
[MODE].
Press 3/4 to select [INTELLIGENT AUTO], and then press [MENU/SET].
• You can quickly switch to Intelligent auto mode by pressing [¦] A when the [REC]/
[PLAYBACK] selector switch is set to record. Pressing [¦] again takes you back to the
previous mode.
• The status indicator 3 lights when you
turn this unit on 2. (It turns off after about
1 second.)
(
1: Shutter button)
Hold the camera gently with both hands,
keep your arms still at your side and stand
with your feet slightly apart.
B Flash
C AF assist lamp
Press the shutter button halfway to focus.
• The focus indication 1 (green) lights when the subject
is focused.
• The AF area 2 is displayed around the subject’s face
by the face detection function. In other cases, it is
displayed at the point on the subject which is in focus.
• The focus range is 5 cm (0.17 feet) (Wide)/50 cm
(1.64 feet) (Tele) to ¶.


1
2
DMC-FS12&FS62P-VQT2D42_eng.book 18 ページ ２００９年３月２５日 水曜日 午前１１時１７分