Polycom Sound Station2 Direct Connect-MERIDIAN - Manual (Page 8)

SoundStation2 Direct Connect User Guide - 8
SoundStation2 Direct Connect is
compatible with any digital voice port
on NORTEL® Meridian®, Meridian
1 (option 11 to 81), SL-1, or SL-100
PBX with the exception of those sup-
porting MBS (CENTREX®) phone
sets. In addition to the basic product
functions, it supports two special func-
tions - Conference and Transfer - in
the same manner as the default M2616
Model 20, using key number posi-
tion 3 for Conference and key number
position 6 for Transfer. Contact your
PBX Administrator to confirm that the
Conference and Transfer functions at
the port are assigned to these key num-
ber positions.
System Compatibility
1. Insert the short Network Cable into
the SoundStation2 Direct Connect
Interface Module jack marked with
the Network icon ( ). Plug the
other end into the digital voice
jack, as shown.
► If the connector does not fit, you
will need one of the optional RJ11
to RJ45 Network Cables for con-
nection to the wall jack, and for
your phone should you choose that
option. This cable has a smaller
connector on one end, so try it both
ways.
You have the option to install a Meridian
series telephone along with your
SoundStation2 Direct Connect:
1. Plug the Meridian Telephone cable
into the jack on the Interface Mod-
ule indicated by the telephone icon
.
► If the connector does not fit you
will need one of the optional
cables as a replacement for your
phone cable. This cable has a
smaller connector on one end, so
try it both ways.
2. Plug the long cable into the jack on
the Interface Module labeled with
the icon as shown.
Setting up SoundStation2 Direct Connect
Any digital phone supported by your
telephone network can be connected to
the phone jack on the Interface Module.