Headset controls – Plantronics VOYAGER855 User Manual

Page 12

Advertising
background image

12

Plantronics Voyager 855

EN

ENGLISH

hEAdSET CONTrOLS

Action

Steps

Turn on the
headset

Press and hold the call control button until the indicator
glows blue.

NOTE:

When your headset is in standby mode, the indicator is off.

To confirm that your headset is on, press any button or slide the
boom out. You should see a blue light flash or hear a tone.

Turn off the
headset

Press and hold the call control button until the indicator glows
red. When the power is off, the indicator stays off.

Answer a call

Briefly press the call control button, or slide the boom to the
open position.

End a call

Briefly press the call control button, or slide the boom to the
closed position.

Make a call

The call automatically transfers to your headset after you enter
the number on your phone and press send.

Toggle mute
on/off

Press the mute button.

Turn off the
online indicator

Press and hold mute for 2 seconds while the headset is on.
Headset will flash blue 4 times. Repeat action to activate
online indicators. Headset will flash blue 2 times.

Adjust volume

During an active call, press the volume button:

Volume up

Volume down

WARNING:

Do not use headphones / headsets at high volumes for an extended

period of time. Doing so can cause hearing loss. Always listen at moderate levels. See
www.plantronics.com/healthandsafety for more information on headsets and hearing.

Advertising