Panasonic PT-D5600U - Manual (Page 29)

29
Adjusting the picture
• For RGB signals • For DVI signals
• For S-Video/Video signals •For YP
B
P
R
signals
PICTURE MODE
The picture mode can be selected from the
following depending on viewing conditions and the
video signal source in use:
DYNAMIC : Picture brightness/contrast ratio is
increased to suit brighter viewing
environments.
GRAPHIC : The picture becomes suitable for
input from to the personal
computer.
STANDARD : The picture becomes suitable for
moving images in general.
CINEMA : The picture becomes suitable for
movie sources.
NATURAL : The picture becomes suitable for
use in a dark room.
BRIGHT
“BRIGHT” is used to adjust the black level
(brightness).
: Raises the picture brightness.
: Lowers the picture brightness.
CONTRAST
“CONTRAST” is used to adjust the contrast ratio.
: Raises the contrast ratio.
: Lowers the contrast ratio.
COLOR
(For S-Video/Video/YP B P R signals only)
: Deepens colors.
: Weakens colors.
TINT
(For S-Video/Video/YP B P R signals only)
“TINT” is used to adjust human skin.
: Adjusts skin tone toward greenish color.
: Adjusts skin tone toward reddish-purple.
COLOR TEMP.
The color temperature is adjusted when the white
areas of images take on a reddish or bluish hue.
DEFAULT : Standard setting
HIGH
: The white areas take on a more
bluish-white hue.
MIDDLE : The white areas take on a slightly
reddish hue.
USER : The RGB values of the white balance
are set separately.
Press the ENTER button, select “W-
BAL HIGH” or “W-BAL LOW”, and
proceed with the detailed settings.
: The colors of the selected item
are darkened.
: The colors of the selected item
are lightened.
WHITE GAIN
The brightness of white parts of the image can be
adjusted.
: The intensity of white color increases.
: Reverts to natural image.
SHARPNESS
“SHARPNESS” is used to adjust the crispness of
the image.
: Sharpens the edge of the image.
: Softens the edge of the image.
NR
In this mode, the video noise is reduced.
(For S-Video/Video/YP
B
P
R
signals)
OFF : No correction
ON : Noise reduction is set to ON.
(For RGB/DVI signals)
OFF : No correction
1
: Low
2 : Middle
3 : High
PICTURE
SELECT ADJ RETRN
PICTURE MODE GRAPHIC
DEFAULT
BRIGHT 32
CONTRAST 32
SHARPNESS 0 6
COLOR TEMP.
ON
OFF
AI
NR
RGB SYSTEM
WHITE GAIN 10
PICTURE
SELECT ADJ RETRN
PICTURE MODE GRAPHIC
DEFAULT
BRIGHT 32
CONTRAST 32
SHARPNESS 0 6
COLOR TEMP.
ON
OFF
AI
NR
WHITE GAIN 10
PICTURE
SELECT ADJ RETRN
PICTURE MODE STANDARD
DEFAULT
BRIGHT 32
CONTRAST 32
SHARPNESS 0 6
COLOR 32
TINT 32
COLOR TEMP.
ON
ON NR
AI
AUTO1 TV-SYSTEM
WHITE GAIN 0 5
PICTURE
SELECT ADJ RETRN
PICTURE MODE STANDARD
DEFAULT
BRIGHT 32
CONTRAST 32
SHARPNESS 0 6
COLOR 32
TINT 32
COLOR TEMP.
ON
ON NR
AI
AUTO SYSTEM
WHITE GAIN 0 5