Palm Tungsten T5 - Manual (Page 104)

Tungsten™ T5 Handheld 95
CHAPTER 12 Making Wireless Connections
4
Enter a passkey:
a. Enter a passkey number. This can be any number you choose; it does not, for
example, have to be a password you use to access a network or an email
account.
You must enter the same passkey on your handheld and your
mobile phone in order to connect to your phone.
b. Select OK.
5
Finish phone connection setup and begin network setup:
a. Select Done, and then select Yes.
If you want to use your phone connection only to dial phone
numbers from your handheld or send text messages, select Done and then
select No. You have finished setup.
b. Select Next.
6
Begin network setup:
a. Select the pick list, select Yes or No, and then select Next. If you select Yes,
go to step 7. If you select No, go to step 8.
Continued
»
Key Term
Passkey Like a
password, the passkey is
a security measure.
Connections can happen
only between your
handheld and a device
that has the same
passkey. For example, to
connect to your mobile
phone, you need to enter
the same passkey on your
handheld and on your
phone.
»
Key Term
Trusted pair Two
devices—for example,
your handheld and your
mobile phone—that can
connect to each other
because each device can
find the same passkey on
the other device. Once
you form a trusted pair
with a device, you do not
need to enter a passkey to
connect with that device
again.
IMPORTANT [ ! ]
NOTE