Panasonic DP-C263 EN - Manual (Page 35)

35
Chapter 1 Basic Menu Features
Recalling a Preset Job Stored in Memory
The specific copy job will be done by recalling the registered preset jobs.
A job called “Double Exposure” is set as default.
Refer to Double Exposure in the Operating Instructions (For Basic Operations) of provided booklet.
z Refer to the Storing a Job in Memory (see page 34).
1
Place original(s).
z Refer to Placing Originals (Copy) in the
Operating Instructions (For Basic
Operations) of provided booklet.
2
Press the Copy key if the machine is
set to other function mode.
3
Select “Preset Jobs”.
4
Select a stored job.
z Job buttons without names, indicate that
there are no jobs registered.
z If the confirmation screen “Ready for M1
Memory Copy” is displayed, select “Close”.
5
To confirm the job settings, select
“Confirm Settings”, and then touch
“Close”.
z To change the setting, refer to the
Confirming/Editing the Selected Copy
Features (see page 33).
6
Press the Start key.