Panasonic DP-C263 EN - Manual (Page 68)

68
Chapter 2 More Menus F
eatures
„ Text Stamp
The original can be copied with printed text.
z Up to 32 characters, including A to Z, a to z, 0 to 9, symbols, @, . (Period), _ and space can be printed.
z The font size is 2.1 mm x 3.1 mm.
1
Select “Text Stamp”.
z To display this screen, refer to steps 1 to 4 of
Basic Operation for Stamping (see page
61).
2
Select the orientation of the original.
3
Select the stamping position of the text
stamp.
4
Select “Change”.
Select the orientation of the
original according to the
orientation of its characters
(vertical direction).
Select the orientation of the
original according to the
orientation of its characters
(horizontal direction).
The text stamp is printed on
the bottom at the center.
The text stamp is printed on
the bottom right side.
The text stamp is printed on
the opposite side.