Installing the bottle holder – Precor P30 User Manual

Page 73

Advertising
background image

Assembling the Exercise Bike

19

Installing the Bottle Holder

The bottle holder attaches to a plastic support that has been

mounted on the upright support at the factory.

To install the bottle holder:
1.

Position the bottle holder on its support so that the three

tabs on the bottle holder fit into the three rectangular

holes in the support.

2.

Secure the bottle holder onto its support using the two #8

x ⁵₈-inch self-tapping screws, as shown in the following

illustration.

Figure 7: Installing the bottle holder

Advertising