Pentax Optio MX - Manual (Page 10)

8
The procedures for installing the necessary software are explained.
1
Turn on your computer.
2
Insert the CD-ROM (S-SW17) into your CD-ROM drive.
The PENTAX Software Installer screen is displayed on the
desktop.
3
Click your applicable
language.
You can choose the languages from
the displayed screen.
A selection screen to install your
desired software is displayed.
4
Click [USB Driver] on the
Software Installer screen.
The InstallShield Wizard screen will
appear.
Follow the instruction on the screen.
Complete InstallShield Wizard
screen will appear.
Installing the Software (for Windows)
When multiple accounts have been setup in Windows 2000 or
Windows XP, log on with an account that has administrative rights
before installing the software.
Installing the USB Driver (Windows 98/98SE only)
• If the PENTAX Software Installer screen does not appear
Display the PENTAX Software Installer screen following the steps
below.
1) Double-click [My Computer] on the desktop.
2) Double-click the [CD-ROM Drive (S-SW17)] icon.
3) Double-click [Setup.exe].
e_00_pc_kb353.book Page 8 Wednesday, April 28, 2004 1:27 PM