Pentax Optio MX - Manual (Page 20)

18
4
Confirm that [Copy images to
hard drive] and [Launch
ACDSee] are checked, and
click [Next].
5
Click [Browse].
The [Browse For Folder] screen
appears.
6
Select a destination folder and
click [OK].
7
Click [Next].
If the digital camera is connected to your computer in [PictBridge]
USB Connection mode, the digital camera will not be properly
recognized as a storage device. In that case, disconnect the USB
cable from your camera and PC, follow the instructions in “Setting
Up Your Digital Camera” (1p.16) to set the USB Connection mode
to [PC], and then reconnect the USB cable.
Transferring Images
e_00_pc_kb353.book Page 18 Wednesday, April 28, 2004 1:27 PM