Main menu, Continued) – Panasonic BT-LH1700WP User Manual

Page 19

Advertising

g About the SUB WINDOW

You can compare saved still and moving images or show the Wave Form Monitor (WFM) by using the “SUB
WINDOW” function to separate the main window into 2 displays as shown below.
Depending on the settings of the “SUB WINDOW” (FULL, PART, WFM) in the “SYSTEM CONFIG” menu

(

J page 18) it can be switched as shown below.

Every time you press the [FUNCTION1] (or [FUNCTION2]) button (

J page 17) assigned to the “SUB WINDOW”

function, the window switches (To use the “SUB WINDOW” function, assign it to [FUNCTION1] or
[FUNCTION2]).

This function compares screens with the same input terminal and same format. If different input formats, or if
signals are input between different input channels, the sub-window (left side, still image) becomes blurred and
blanking occurs. However, if the same format signals are input into the input terminal when acquiring the still image,
the images will be displayed correctly.

• FULL

The main window is reduced and made into 2 sub window (sub window+sub window).

Normal window

(main window)

Before inputting the image
(sub window+sub window)

After inputting the image

(sub window+sub window)

• PART

Only the sub window size is cut out of the main window, and the cut section is made into 2 sub window images
(sub window+sub window).

Normal window

(main window)

Before inputting the image
(sub window+sub window)

After inputting the image

(sub window+sub window)

The central section is cut out

Lines up and displays the
section cut out of the main
window

* Only compatible with

HD signals

• WFM

Displays the Wave Form Monitor image

Normal window

WFM display

WFM (Wave Form Monitor)

The window is displayed in 16:9 aspect.

Press [FUNCTION1] or [FUNCTION2] once

moving image