Panasonic FP0 Series - Manual (Page 19)

19
Control FPWIN Pro
PLC programming software conforming to IEC 61131-3
FP Programmer II Ver. 2
Programming cable
AFC8513D
Programming cable
AFC8523
Programming
software
Connect with RS232C cable
FP0
The most important highlights at a glance:
■ Reuse of ready made functions and function blocks saves time for programming and debugging
■ 5 programming languages (Instruction List, Ladder Diagram, Function Block Diagram,
Sequential Function Chart, Structured Text)
■ Convenient comment application in 6 languages (English, German, French, Italian, Spanish, Japanese)
■ 4 standard libraries (IEC Standard library, Matsushita library (M Lib), Pulsed library (P Lib), NC Tool library (NC Tool Lib))
■ Fewer errors through defined data types and encapsulation
■ Well-structured through programme organisation units, task-
and project management
■ Online monitoring and diagnostic
■ Ethernet and Modem communication for remote-programming,
-service, and -diagnostic
■ Password protection with different levels
■ Many additional application libraries available
■ IEC 61131-3 protects your investments for the future
Control FPWIN Pro – Programming
Control FPWIN Pro is the Matsushita programming software according to the international standard IEC 61131-3.
Control FPWIN Pro works with the FP0 as well as any FP series programmable controller. Also, since the tool port is an
RS232C, connection to a PC is easy – it only requires a single cable. No converter or adapter is required.
FP0_broschüre_4093 euen0904 15.10.2004 8:43 Uhr Seite 19
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.ctiautomation.net - Email: [email protected]