Panasonic TC-20LA1H - Manual (Page 6)

6
Before Operating This Set
Antenna cover removal and fitting
TX-17LA1, TC-17LA1 TX-20LA1, TC-20LA1
Removal Removal
Fitting Fitting
1. Grasp the cover at the
bottom end and initially
remove by pulling slightly
toward yourself.
2. Slowly pull out in the
downward direction.
1. Grasp the opening and
initially pull the cover
slightly towards yourself to
disengage the claws (at 2
points on both the left and
right).
2. Slowly pull out in the
downward direction.
1. Insert the claws (at 4
points) at the top end.
2. Push it until click.
1. Insert the claws (at 4
points) at the top end.
2. Push it until click.
1
2
1
2
2
1
Note:
Depending on the type of cable used it may not be possible to close the cover. In such cases the cable may be
routed through the antenna cover.
1. Disengage the claws at the
uppermost end.
2. Slowly pull out in the upward
direction.
1. Insert the claws (at 2 points) at
the bottom.
2. Push it until click.
2
1
1
2
1
2
Cable cover removal and fitting
Removal Fitting
03.10.29, 5:46 PM Page 6