Philips PET1031/93 - Manual

3
OPEN HERE
1 Switch OFF the set.
2 Connect the supplied adaptor to the set and
the ACoutlet.
3 The RED light comes on.
4 The battery pack will be fully charged in
approximately 5 hours. When the RED light
goes off, it means that thebattery pack is fully
charged.
TIP: Your battery will continue to charge while
the player is inuse. However, the RED light will
not appear and it will takeapproximately 12 hours
to fully charge the battery pack.
Philips Portable DVD Player PET1031
Quick start guide
2 3 4 1
3
Charge Enjoy DVD Connect to TV Swiveling LCD screen
1 Open the lid.
2 Press and hold POWER .
3 The GREEN light turns on.
4 Open the DVD door by sliding the OPEN .
5 Remove protective card (if any).
6 Load the DVD disc.
7 Close the DVD door and the set will
automatically startto play.
8 Use the control keys on the set or the remote
control.
2
4 6
3
3
1
7
1 2 AV OUT SD/MMC CARD S VIDEO COMP.OUT DV 9V-12V
1 Connect the set to the TV as shown.
2 Please select an appropriate input or source on the
TV. You can consult the owner’s manual of your
TV. (If yourTV does not have Audio and Video
inputs, you will needto purchase a RF modulator.
Please consult your dealerfor more information.)
TIP: For better video quality,please use COMP.OUT
connection (see User Manual section 6.2.6 )
You can swivel the LCD screen
of this player clockwisea
maximum of 180° for use.
PET1031_12_QSG_English.indd 1 2008-1-28 12:13:20