Panasonic BT-LH2600WE - Manual (Page 13)

13
• You can set FUNCTION display in the menu.
• When “FUNCTION DISPLAY” (J page 22) is “ON”
and either [FUNCTION1] or [FUNCTION5] is
pressed, the unit displays the status of the
FUNCTION item set.
• The display disappears if remains idle for 2 seconds.
• The operational status is displayed in “XXXXX” (J
page 23 “Operation items displayed when a
FUNCTION button is used”).
• When the signal is SDI, the audio level is displayed
on the white skeleton bar meter.
• You can switch the level display on and off, and set
the number of displayed channels using the menu.
• The 0 dB line and channel display can be switched
on and off from the menu.
• This is displayed when the menu is used.
• The display disappears if remains idle for 2 minutes.
• The display position can be changed (J page 21
“MENU POSITION”).
Function display
F1:MARKER
F2:WFM
F3:LEVEL METER
F4:PIXEL TO PIXEL
F5:PIXEL POS.
XXXXX
Audio level meter display
1 1
3 3
5 5
7 7
2 2
4 4
6 6
8 8
Level
display 0 dB
line Channel
display
Menu display
MENU
FUNCTION
HOURMETER
[MAIN MENU]
Displays the operation explanation for the
menu button.
How to Use the On Screen Menu
(continued)