Panasonic BT-LH2600WE - Manual (Page 20)

20
3
g WB adjustment mode
You can adjust “WHITE BALANCE VAR1” – “WHITE BALANCE VAR3” (WB) by selecting “VAR1” – “VAR3” in
“COLOR TEMP.” in the “VIDEO CONFIG” menu.
The underlined values are factory preset setting values.
*1 When “COLOR TEMP.” is selected and [ENTER] is pressed following item change, the display changes to the
confirmation screen. Selecting “YES” and pressing [ENTER] on this screen return GAIN and BIAS values to the
selected color temperature values.
*2 When adjusting, the item display moves to the lower part of the screen.
About IP Mode
By selecting “MODE1”, you can convert IP through Frame Interpolation.
This unit has reduced the Frame Interpolation delay to 1 field or less, compared to our old models having caused
1 frame delay or more.
Factory preset setting value is “MODE1” recommended for normal use. Depending on images, in very rare
cases, noise may occur on the screen. In such a case, “MODE 2” is recommended.
By selecting “MODE2”, you can convert IP through Field Interpolation.
Depending on still images, etc., flickers may occur on the screen. In such a case, “MODE 1” is recommended.
Sub menu Settings Explanation
COLOR TEMP. *1 <USER0–63>
<D93>
<D65>
<D56>
Used to select the color temperature that will become the
basis for adjustments.
<USER0–63> Adjustable settings 0–63 (color
temperature around 3000K–9300K)
<D93> Color temperature around 9300K
<D65> Color temperature around 6500K
<D56> Color temperature around 5600K
GAIN RED
<0–511>
(Factory presets are values
for color temperature <D65>.)
* The presets are values
adjusted before shipment
from factories.
GAIN elements for RED are adjusted. *2
GAIN GREEN
GAIN elements for GREEN are adjusted. *2
GAIN BLUE
GAIN elements for BLUE are adjusted. *2
BIAS RED
<-512–511>
(Factory preset settings: 0)
BIAS elements for RED are adjusted. *2
BIAS GREEN BIAS elements for GREEN are adjusted. *2
BIAS BLUE BIAS elements for BLUE are adjusted. *2
RESET “GAIN RED” – “BIAS BLUE” values are reset to color
temperatures values selected in “COLOR TEMP.”.
Main Menu
(continued)