Turning the efx532 on and off – Precor EFX 532 User Manual
Page 15
page 15
C
O
M
M
E
R
C
I
A
L
P
R
O
D
U
C
T
S
D
I
V
I
S
I
O
N
15. If you need to move the EFX, ask for assistance. The EFX weighs over 160
pounds (72 kilograms). A hand cart may be useful to help move the unit.
CAUTION: A fully-assembled EFX532 is very heavy. To avoid possible
injury, Precor recommends that more than one person move the
EFX532 to its final location.
16. Level the unit. Diagram 7, inset. The unit has adjustable rear feet that can
help level the unit ± 1/4". To rotate the adjustable rear feet, have an assis-
tant stand in front of the display console and face the rear feet. Ask the
assistant to grasp the upper handrails near the display console and pull
toward him or her. The rear feet should lift off the floor which will allow you
to rotate the rubber feet in the necessary direction.
17. Connect the power cord. Diagram 7. Insert the power plug’s connector
into the receptacle at the rear of the base assembly.
CAUTION: Use an appropriate power cord. Do not remove or otherwise
bypass the 3-prong plug with an adapter in order to use a non-grounded
outlet. Do not plug the EFX532 into a power transformer in an attempt to
adjust the voltage requirements. Failure to follow these instruction’s
might damage the unit and void Precor’s limited warranty.
18. Plug the EFX532 into a grounded outlet. Be sure to use the appropriate
voltage requirements. Refer to
Grounding Instructions on the front cover.
TURNING THE EFX532 ON AND OFF
Use the ON/OFF (I/O) power switch to turn the unit ON and OFF. This switch is
located at the rear of the unit, near the power cord receptacle. Refer to Diagram 7.
CAUTION: Never remove or bypass the 3-prong plug on the unit’s power
cable with an adapter. Do not use a non-grounded outlet. Do not plug the EFX
into a power transformer in an attempt to adjust the voltage requirements.
Use the I/O power switch to turn OFF (0) the EFX532 and unplug the unit from
the power outlet when it is not in use for extended periods of time.
Diagram 7
Connect the power cord.
Power plug
Adjustable rear foot
Power cordreceptacle
ON/OFF (I/O) switch
Adjustable rear foot