Panasonic AJ-HD1400P - Manual (Page 48)

48
Setup menus
(continued)
VIDEO (continued)
*1 Displayed menus may vary depending on the settings in
menu No. 25 SYSTEM FREQ. For details, refer to
“Menus which are displayed” (page 32).
*UP: With HD output (HD tape playback or up-converted
output)
*DW: With SD output (SD tape playback or down-converted
output)
“_____” indicates the factory setting.
No./Item Description of setting
651* 1
HUE STYLE
(SD)*
DW
For selecting the rotational axis of the chroma phase
adjustment.
0000
Pb-Pr :
The axis rotates in a perfect circle on the SDI
(component style) vectorscope.
0001 U-V :
The axis rotates in a perfect circle on the analog
(composite style) vectorscope.
653
Y LVL
(HD)*
UP
For adjusting the Y level of the HD SDI or HD analog
component output.
(–
to 0 dB to +3 dB)
0000 0.0%
: :
1000
100.0%
: :
1413
141.3%
<Note>
This setting takes effect when “CMPNT” has been
selected as the menu item No.650 setting.
654
Pb LVL
(HD)*
UP
For adjusting the PB level of the HD SD or HD analog
componentI output.
(–
to 0 dB to +3 dB)
0000 0.0%
: :
1000
100.0%
: :
1413
141.3%
<Note>
This setting takes effect when “CMPNT” has been
selected as the menu item No.650 setting.
655
Pr LVL
(HD)* UP
For adjusting the PB level of the HD SDI or HD
analog component output.
(–
to 0 dB to +3 dB)
0000 0.0%
: :
1000
100.0%
: :
1413
141.3%
<Note>
This setting takes effect when “CMPNT” has been
selected as the menu item No.650 setting.
656
BK LVL
(HD)* UP
For adjusting the black level of the HD SDI or HD
analog component output.
50
–10.0%
: :
150
0.0%
: :
250
+10.0%
<Note>
This setting takes effect when “CMPNT” has been
selected as the menu item No.650 setting.
658
Y LVL
(SD)*
DW
For adjusting the Y level of the SD SDI output and
analog composite output. (–
to 0 dB to +3 dB)
0000 0.0%
: :
1000
100.0%
: :
1413
141.3%
<Note>
This setting takes effect when “CMPNT” has been
selected as the menu item No.650 setting.
659
Pb LVL
(SD)* DW
For adjusting the PB level of the SD SDI output and
analog composite output. (–
to 0 dB to +3 dB)
0000 0.0%
: :
1000
100.0%
: :
1413
141.3%
<Note>
This setting takes effect when “CMPNT” has been
selected as the menu item No.650 setting.
No./Item Description of setting
660
Pr LVL
(SD)* DW
For adjusting the PR level of the SD SDI output and
analog composite output. (–
to 0 dB to +3 dB)
0000 0.0%
: :
1000
100.0%
: :
1413
141.3%
<Note>
This setting takes effect when “CMPNT” has been
selected as the menu item No.650 setting.
661
BK LVL
(SD)*
DW
For adjusting the black level of the SD SDI output and
analog composite output.
50
–10.0%
: :
150
0.0%
: :
250
+10.0%
<Note>
This setting takes effect when “CMPNT” has been
selected as the menu item No.650 setting.
662
V LEVEL For adjusting the video level of the HD SDI, analog
component output, SD SDI output and analog
composite output. (–
to 0 dB to +3 dB)
0000 0.0%
: :
1000
100.0%
: :
2000
200.0%
<Note>
This setting takes effect when “CMPST” has been
selected as the menu item No.650 setting.
663
C LEVEL For adjusting the chroma level of the HD SDI, analog
component output, SD SDI output and analog
composite output. (–
to 0 dB to +3 dB)
0000 0.0%
: :
1000
100.0%
: :
1413
141.3%
<Note>
This setting takes effect when “CMPST” has been
selected as the menu item No.650 setting.
664
HUE
(AJ-HD1400P)
C PHASE
(AJ-HD1400E)
For adjusting the chroma phase of the HD SDI,
analog component output, SD SDI output and analog
composite output. (Approx. –30
o to +30 o)
0000 –31.0
: :
0062
0.0
: :
0124
31.0
<Notes>
z This setting takes effect when “CMPST” has been
selected as the menu item No.650 setting.
z If 50 Hz mode or 25 Hz mode has been selected as
the system menu item No.25 SYSTEM FREQ
setting:
• The HD SDI output cannot be adjusted.
• The SD SDI output and analog composite output
can be adjusted only when an SD format tape is
being played back.