Pioneer Elite VSX-90TXV - Manual (Page 62)

Controlling the rest of your system 11
62
En
When direct function is on, any component you select
(using the input source buttons) will be selected by both
the receiver and the remote control. When you turn direct
function off, you can operate the remote control without
affecting the receiver. 1
1 While pressing the RECEIVER button, press SETUP.
The remote LCD display shows SETUP.
2 Use / to select DIRECT F then press ENTER.
The LCD on the remote prompts you for the button of the
input source you want to control.
3 Press the input source button for the component
you want to control then press ENTER.
4 Use / to switch direct function ON or OFF then
press ENTER.
The LCD shows
OK to confirm the setting.
Multi Operation and System Off
The Multi Operation feature allows you to program a
series of up to five commands for the components in your
system. For example, you could turn on your TV, turn on
your DVD player and start playing the loaded DVD using
only two buttons on the remote control.
Similar to multi operations, System Off allows you to use
one button to stop and switch off a series of components
in your system at the same time.
2
Programming a multi-operation or a
shutdown sequence
1 While pressing the RECEIVER button, press SETUP.
The remote LCD display shows SETUP.
2 Use / to select MULTI OP or SYS OFF from the
menu and press ENTER.
If you selected Multi Operation (
MULTI OP), the LCD on
the remote prompts you for an input source button.
If you selected System Off ( SYSOFF), go to step 4.
3 Press the input source button for the component
that will start the multi-operation then press ENTER.
For example, if you want to start the sequence by
switching on your DVD player, press
DVD.
4 Use / to select CODE EDT then press ENTER.
To erase any previously stored multi-operations (or
shutdown sequences) select
CODE ERS above.
5 Use / to select a command in the sequence then
press ENTER.
If this is the first command in the sequence, select
1ST
CODE. Otherwise, simply choose the next command in
the sequence.
PRES KEY flashes after you press ENTER.
6 If necessary, press the input source button for the
component whose command you want to input.
This is only necessary if the command is for a new
component (input source).
7 Select the button for the command you want to
input.
The following remote control commands can be selected:
• You don’t need to program the receiver to switch on
or off. This is done automatically.
With Pioneer components, you don’t need to:
• program the power to switch off in a shutdown
sequence (except DVD recorders);
• program the power to switch on if it’s the source
component selected in step 3;
• program a Pioneer TV or monitor to switch on if the
input function (selected in step 2) has video input
terminals;
These take priority in multi operations (not shutdown).
Note
1 You can’t use direct function with the TV CTRL function.
2 • Before Multi Operation and System Off will work correctly, you must setup the remote to work with your TV and other components (see Setting the
remote to control other components on page 61 for more on this).
• Some units may take some time to power up, in which case multiple operations may not be possible.
• Power on and off commands only work with components that have a standby mode.
ANALOG
ATT
SLEEP SB ch
TV DVR 1 TV CTRL
CD RECEIVER TUNER iPod
DVD
ZONE 2 CD-R/TAPE
DVR 2 XM RADIO SIRIUS
ENTER
TV CONTROL
TUNE
TUNE
ST ST
TOP MENU
T.EDIT
MENU
RETURN
GUIDE BAND
SETUP
ANALOG
ATT
MIDNIGHT/
LOUDNESS
DIMMER
SLEEP SB ch
SR+
+10 D.ACCESS
DIALOG E PHASE S.RETRIEVER
CLASS DISC
RECEIVER SOURCE
SYSTEM OFF
INPUT
SELECT
ENTER
TUNE
TUNE
ST ST
ENTER
TOP MENU
T.EDIT
MENU
RETURN
GUIDE BAND
SETUP
TV DVR 1 TV CTRL
CD RECEIVER TUNER iPod
DVD
ZONE 2 CD-R/TAPE
DVR 2 XM RADIO SIRIUS
TV CONTROL
SHIFT
VOL
STEREO/ F.S.SURR
PHOTO
INPUT
SELECT TV CH
MPX
AUDIO
DISP
SUBTITLE
MULTI OPE
REC ANT INFO
MUTE
TV VOL
REC STOP JUKEBOX
HDD
CH CH
DVD
RECEIVER
THX STANDARD
AUTO SURR SIGNAL SEL
ADV.SURR
ACOUSTIC EQ
EFFECT/CH SEL LEVEL
VSX-90TXV_KU.book Page 62 Friday, March 16, 2007 5:46 PM