Plus Corporation COPYBOARD M-115 - Manual (Page 19)

E-19
Printing
Use a printer to print out the image that has been drawn on the sheet surface.
Operations and names of parts differ from printer to printer. For details of operations, see your printer’s operating
instructions.
Preparing the Printer
Please check that the copyboard and the printer have been connected. See Page E-15.
Set the paper.
Please use A4 or letter size printer paper.
See your printer instruction manual for details.
1) Arrange the paper edges so that they are even.
2) Insert paper at the specified position of the paper tray.
3) Press the paper guide gently until it touches the paper.
Note
See your printer’s operating instructions for a
description of the paper that can be used.
Switch on the power.
Press the power switch. The power indicator lights.
This completes the preparation of the printer.
Press the Print
button on the copyboard’s control panel. One page
worth of data is read and the printing operation starts.
Notice
• Depending on the printer, indicators, etc., may flash after the
power is turned until the printer is prepared to print. In this case,
see the printer’s operating instructions and check that the printer
is ready before starting the printing operation on the copyboard.
When finished printing...
Switch off the printer power and remove the paper.
Close the paper tray.
Notice
Caution: Do not turn off the power or disconnect the USB cable dur-
ing printing.
Power switch
Paper tray
Paper guide
Paper
Paper guide
Appearance of printer is for
illustration purposes.