Plus Corporation COPYBOARD M-115 - Manual (Page 24)

E-24
Press the ON/Standby button and switch on the power.
Note
• Press the ON/Standby button more than 5 seconds after connecting the
AC power adapter to the copyboard unit or after turning off the power.
• Press the ON/Standby button to switch on the power. The LED of the
display window will light.
Insert the USB memory device into the Memory port
(USB port) of the copyboard
Using USB Memory
The content of what has been drawn on the sheet surface of the copyboard can be saved in USB memory.
Later, the saved image can be read into a personal computer and made into a document of the proceedings of
the meeting, or affixed to a document.
• What is needed to use the USB memory function
USB memory: Commercially-available product
Personal computer: The connector is a USB port (type A), and the interface supports USB 1.1
Note
• The copyboard supports the USB memory formats of FAT 12/16 and FAT 32.
USB Memory Storage Procedure
Preparation:
Connect the AC power adapter to the copyboard. See Page E-16.
Notice
• Check the side (polarity) of the USB memo-
ry device before inserting it. Forcing it in the
reverse orientation will damage the USB port or
USB memory device.
• Be careful not to bump into the USB memory
device with hand or body while it is mount-
ed. Doing so could damage the USB memory
device or USB port.
Press the Feed/Stop button (for model M-115, the Page
change / buttons) and display the sheet surface you want
to store.
The procedure for displaying the sheet surface you want to store is the same as for printing.
See “Basic Printing Operation” on page E-20 and “Specifying the Page (model
M-115)” on page E-23.
Note
• The one screen portion that is viewable will be saved in USB memory.
• To make fine adjustments to the sheet surface, when the sheet is stopped,
move the sheet slowly by hand. The sheet can be moved either left or right.
• Saving of the portion located around the sheet surface might not be pos-
sible. Please see “Effective reading size” on Page E-9.
ON/
Standby
O
N /
S ta
n d b y
M E M O R Y
Feed/Stop
Notice
• For a description of the USB
memory devices usable with this
copyboard, please go to our web-
site at:
http://www.plus-vision.com
Continued on next page
Screen Reprint
Page
Number of Copies
Print
Save
Feed/ Stop
Color Density
Reprint
MEMORY
ON/
Standby
M-11S/M-11W
M-115