Cassette tape player, Loading a cassette, Ejecting the tape – Panasonic CQ-4330U User Manual

Page 12: Play side change, Cassette head cleaning warning, Rewind and fast forward, Tape slack

Advertising
background image

CQ-4330U

12

Cassette Tape Player

LOUD

OL

SEL/SAT

USH

ASS/TREB

L/FADER

MUTE

SCAN

ILL

6

5

SKP

4

REP

3

TPS

2

NR

1

MTL

DISC

CD SCAN

RPT

RDM

CQ-4330U

DISP

MODE

Exposed Tape side

Loading a Cassette

Insert the cassette with the exposed tape side facing
to the right. Gently push the cassette in until the
loading begins. The cassette will be loaded in place
and playback starts.

Ejecting the Tape

Press [u] and the cassette will eject for removal, and the
previous mode of operation will be resumed.
Notes:
• If power is switched off before [u] is pressed, the cassette

will not eject. Switch on the power again and press [u] to
eject the cassette.

• The cassette tape should always be removed from the

cassette slot when not in use.

Play Side Change

Press [

̇̈] to switch to the program on the other side of

the tape.
The display changes to indicate which program is
playing.

Cassette Head Cleaning Warning

• The display will show “CLN HEAD” to remind you to clean

the cassette head after accumulating 100 hours tape
playing.

• Press and hold [

̇̈] for more than 2 seconds to clear the

“CLN HEAD” display and the TAPE mode display will
resume. (It is valid only in TAPE mode.)

Rewind and Fast Forward

Press [1 TRACK] or [2 TRACK] to activate rewind or
fast forward of the tape.

Program Indicator

Note: To maintain your cassette player in top
condition, avoid using tapes that are longer than
90 minutes (C-90).

Notes on Cassette Tapes

Tape Slack:

Use a pencil or similar object to take up the
slack as shown. If a loose tape is used, this may
result in the tape becoming tangled in the
rotating parts of the unit.

Do not touch
or pull out
the tape.

Pencil

Exposed end
(Open end)

Caution: Do not insert a tape when “tape”
indicator “

̅” or “̃” lights.

Top Side Playing

Bottom Side Playing

Program Indicator

Program Indicator

Press

[

̇̈] to stop rewind or fast forward.

If you rewind the tape fully, it will play on the same program
side again.
If you fast forward to the end, play will resume from the
beginning of the other side of the tape.

Advertising