Panasonic CQ-4330U - Manual (Page 13)

LOUD
VOL
SEL/SAT
PUSH
BASS/TREB
BAL/FADER
MUTE
SCAN
TUNE
SEEK
ILL
6 5 SKP 4 REP 3 TPS 2 NR 1 MTL
DISC CD SCAN RPT RDM
CQ-4330U
CLK
ALM
APM DISP
BAND MODE PWR
TUNE
SEEK
6 5 SKP 4 REP 3 TPS 2 NR 1 MTL
CQ-4330U
13
Metal Tape Mode
Press [1] (MTL) when playing metal or chromium
dioxide (CrO2) tapes.
Press [1] (MTL) again to cancel.
Note: Playing normal tapes in metal tape mode
causes high frequency imbalance, which affects
tone quality.
Blank Skip
Press [5] (SKP) to skip unrecorded portions
longer than 15 seconds on the tape.
Press [5] (SKP) again to cancel.
Note: When repeat is on, the blank skip does not
work because the repeat has priority over the
blank skip.
e Press [3] (TPS) again to cancel.
(Rewind:)
8 0
c
(Fast forward:)
1 9
c
Repeat Play
Press [4] (REP) to repeat the current
program.
Press [4] (REP) again to cancel.
Dolby B Noise Reduction
Press [2] (NR) to set the Dolby B NR mode.
Press [2] (NR) again to cancel.
Note: Set the Dolby B NR mode when playing back
a tape recorded with Dolby B Noise Reduction.
Tape Program Search (TPS)
Operation
q Press [3] (TPS) to activate the tape program
search mode.
w To select a desired program, press [2
TRACK] or [1 TRACK] corresponding times
to go forward (up to 9) or backward (up to 8).
Note: The TPS and SKP mode may not
work correctly in the following cases.
This, however, does not mean that the
unit is defective.
• There is an interval less than 3 (15 in
SKP mode) seconds or having a high
level of noise or hum between
programs.
• There is particularly low-level
passage during the program.