Palsonic PMCL-521 - Manual (Page 11)

REC
Recording CD
11
Select the AUX function.
Be sure the audio output of the
device is properly connected (TV
set, video recorder minidisc, etc.)
to the AUX input sockets on the
back of the machine
(see also page 3).
SET
If you want to interrupt
recording briefly-and to
continue.
Start your recording.
CLEAR
Stop your recording.
Select the CD function.
Start your recording.
CLEAR Open the disc compartment to load a
disc.
To find a track to be recorded.
If the tape is not rewound completely, rewind it first.
If you want to start at the current position, press REC button.
Use only good quality tape cassettes.
Keep cassettes away from excessive moisture or dust, magnetic and electrical fields
(loudspeakers and computer monitors, for example)
Always wind the tape to the beginning when you have finished.
Store the cassette in its cover.
Stop your recording.
You can protect your precious recordings from being wiped by breaking out the safety tab on the
side of the cassette.
Should you wish to re-use the tape after removing the tab, cover the hole with adhesive tape.
You can set the machine to automatically switch on and off at a specified time.
Be sure the clock is set accurately.
If you want to cancel the SLEEP function, press the button till "SLEEP" disappears from the display.
* Only if the clock was set before.
Switch off your sound system*.
STAND BY
/ON
Switch to the minute digits.
Set the current minutes.
Enter clock-set mode and then press
/SET button, the hour digits flash.
CLOCK
Start the clock and exit clock set.
Set the current hour
Timer and clock
Setting the clock
Recording from a connected device
DOWN UP
DOWN UP
FUNCTION
REC
-
-