Palsonic PMCL-521 - Manual (Page 3)

INSTALLATION / CONNECTIONS
3
Same distances
Fit the batteries to match the + and
- symbols in the compartment.
Optimal stereo position
Batteries for remote control unit are not provided.
Please protect your environment! As batteries contain certain toxic substances they pollute
the environment if not properly disposed of. Your specialised dealer will accept used batteries.
Make sure the batteries are always of the same type and age, and remove them from
the remote control if you are not using it for a long period.
Plug the provided AM antenna here.
Fit the provided FM antenna here.
Push here
Fit the speaker cables.
Be sure to connect the
pair of cables (for the left
and the right speaker) so
that the marked flexes
have both the same
colour (phase).
Left speaker
Make sure the rating of your household electricity supply matches that shown
on the back of the sound system.
Do not stack objects on top of the sound system.
Do not block the ventilation holes of the sound system.
Place the system so that air can circulate freely.
Switch devices off when connecting or disconnecting.
Do not expose the sound system to high levels of humidity and heat, to avoid the risk of fire and
electric shock.
Do not connect the sound system to the power supply if you have just moved it from a cold to a
warm environment. This can result in condensation inside the system and cause serious damage to
the machine and cassettes. Wait around two hours to allow it to reach room temperature.
Be sure you disconnect the power supply and aerial if you will not be using the system for a long
period or during a thunderstorm.
Be sure to read the precautions on page 2.
Remote control and batteries Placing your sound system components
Installation
Plug a device like a video recorder, TV set, or
minidisc, etc. here. Be sure to connect sockets and
plugs of the same colour.
Right speaker