Pentair 75 - Manual (Page 4)

4
P/N 471105 Rev. E 5-16-01
SAFETY RULES
1. Spa or hot tub water temperatures should never
exceed 104 °F (40 °C). A temperature of 100 °F
(38 °C) is considered safe for a healthy adult.
Special caution is suggested for young children.
2. Drinking of alcoholic beverages before or
during spa or hot tub use can cause drowsiness
which could lead to unconsciousness and
subsequently result in drowning.
3. Pregnant women beware! Soaking in water
above 102° F. (39° C.) can cause fetal damage
during the first three months of pregnancy
(resulting in the birth of a brain-damaged or
deformed child). Pregnant women should stick
to the 100° F. (38° C.) maximum rule.
4. Before entering the spa or hot tub, the user should
check the water temperature with an accurate
thermometer. Spa or hot tub thermostats may err
in regulating water temperatures by as much as
4° F. (2.2° C.).
5. Persons with medical history of heart disease,
circulatory problems, diabetes or blood pressure
problems should obtain their physician's advice
before using spas or hot tubs.
6. Persons taking medication which induce
drowsiness, such as tranquilizers, antihistamines or
anticoagulants should not use spas or hot tubs.
Operation
This instruction manual provides operating instructions, installation, and service information for the MiniMax 100
high performance heater. The information in this manual applies to the MiniMax 75, and 100, natural gas and
propane, DSI; and MiniMax 100 millivolt standing pilot heater models.
It is very important the owner/installer read and understand the section covering installation and recognize the
local code and state codes before installing the MiniMax 100. History and experience have shown that
most heater damage is caused by improper installation practices.
WARRANTY INFORMATION
The MiniMax 100 pool heater is sold with a limited factory warranty. Specific details are described on the
back cover of this manual and a copy of the warranty and warranty registration card are included with
the product. Return the warranty registration card after filling in the serial number from the rating plate inside the
heater. For ordering parts, you should indicate model and serial numbers of the heater. If the parts are
requested for warranty, you must also indicate the date of installation.
Pentair Pool Products high standards of excellence include a policy of continuous product
improvement resulting in your state-of-the-art heater. We reserve the right to make improvements
which change the specifications of the heater without incurring an obligation to update current heater
equipment.
Should overheating occur or the gas supply fail to shut off, turn off the manual gas control valve to the
appliance. Do not use this heater if any part has been under water. Immediately call a qualified service
technician to inspect the heater and to replace any part of control system and gas control which has
been under water.
WARNING