Flash button – Panasonic KX-TS620 User Manual
Page 40
Special Features
40
For assistance, please visit http://www.panasonic.com/phonehelp
FLASH Button
Pressing {FLASH} allows you to use
special features of your host PBX such
as transferring an extension call or
accessing special telephone services
(optional) such as call waiting.
Selecting the flash time
The flash time depends on your
telephone exchange or host PBX. You
can select the following flash times:
“80, 90, 100, 110, 160, 200, 250, 300,
400, 600, 700, 900 ms (milliseconds)”.
Your phone default setting is “600 ms”.
Make sure that the handset is on the
cradle, the AC adaptor is connected
and the SP-PHONE/HEADSET
indicator light is off.
1
Press {FUNCTION/EDIT}.
2
Scroll to “
Program ?” by
pressing {
4
}
or {
3
}
and press
{
OK} (
Yes key).
3
Scroll to “
Set flash time ?”
by pressing {
4
}
or {
3
}
and
press {OK}
(
Yes key).
4
Select the desired time by
pressing {
4
}
or {
3
}
.
5
Press {OK} (
Save key).
• A long beep sounds.
• The display will return to step 3. To
exit the programming mode, press
{
EXIT} or wait for 60 seconds.
• You can exit the programming mode any
time by pressing {EXIT}.
• If the unit is connected via a PBX, PBX
functions (transferring a call, etc.) might
not work correctly. Consult your PBX
supplier for the correct setting.
• If the unit is not connected to AC adaptor,
flash will not function.
Flash time
:6 ms
[OK]= Save
TS620bk01.book Page 40 Wednesday, May 24, 2006 2:31 PM