Philips PD9008 - Manual (Page 23)

24
Replace the remote control batteries. •
The function does not work for this disc. Refer to the disc •
instructions.
Distorted picture
Clean the disc. With a clean, soft, lint-free cloth, wipe the disc •
outwards from the center.
Make sure that the video output format of the disc is compatible with
•
the TV.
Change the video output format to match your TV or program.
•
The LCD is manufactured using high precision technology. You may, •
however, see tiny black points and/or bright points(red, blue, green)
that continuously appear on the LCD. This is a normal result of the
manufacturing process and does not indicate a malfunction.
Cannot play disc
Ensure the disc label is upwards. •
Clean the disc. With a clean, soft, lint-free cloth, wipe the disc •
outwards from the center.
Check if the disc is defective by trying another disc.
•
No response to operating commands
The operation is not permitted by the disc. •
The player feels warm
When the player is in use for a long period of time, its surface will be •
heated. This is normal.
No/weak signal displayed on the screen
TV signal is too weak or out of TV signal covering area. •
Make sure you are in an area with suffi cient coverage. •
Connect to your home TV antenna socket. •
Receiving TV in a driving car may cause signal problems. •
TV reception with Black and White picture or no sound
Ensure that you set the TV system and TV sound correctly according •
to local TV broadcast specifi cations. If you do not know the
information, contact local TV broadcast authorities for help.
EN