Panasonic KX-FC255AL User Manual

Page 51

Advertising
background image

8. Programmable Features

51

8.1.2 Advanced features

Changing the maximum
recording time for
incoming messages

*1

{#}{

1}{0}

{

1} “

1 MINUTE”

{

2} “

GREETING ONLY”: The unit plays the greeting message but

does not record any incoming messages.
{

3} “

3 MINUTES” (default)

Note:

L

You can also program this feature with the cordless handset
(page 48).

Setting the remote
operation ID

*1

{#}{

1}{1}

1. {MENU} i {#}{1}{1}

2. To activate the remote operation feature, enter a 3-digit

remote operation ID.

L

To deactivate the remote operation feature, press {*}.

3. {SET} i {MENU}

Note:

L

You can also program this feature with the cordless handset
(page 48).

Setting the ringtone for
outside calls

*2

{#}{

1}{7}

{

1} “

RINGTONE 1” (default)

{

2} “

RINGTONE 2”

{

3} “

RINGTONE 3”

{

4} “

RINGTONE 4”

{

5} “

RINGTONE 5”

{

6} “

RINGTONE 6”

*1 When this setting is changed using the base unit, the setting for the cordless handset will also be changed, and

vice versa.

*2 This setting can be changed individually for the base unit and the cordless handset.

–

To set the cordless handset ringtone for outside calls, see page 56.

Feature

Feature code

Selection

Setting the journal
report to print
automatically

{#}{

2}{2}

{

0} “

OFF”: The unit will not print a journal report, but will keep a

record of the last 30 fax transmissions and receptions.
{

1} “

ON” (default): The unit will print a journal report automatically

after every 30 new fax transmissions and receptions (page 35).

Sending documents
overseas

{#}{

2}{3}

If you cannot send a fax overseas even if the number is correct
and the line is connected, activate this feature before sending the
fax.
This feature improves the reliability by reducing the transmission
speed.
{

0} “

OFF”: Deactivates this feature.

{

1} “

NEXT FAX”: This setting is effective only for the next

attempted fax transmission. After transmission, the unit will return
to the previous setting.
{

2} “

ERROR” (default): When the previous fax transmission fails

and you wish to re-send the document.

Note:

L

Calling charges may be higher than usual.

Feature

Feature code

Selection

FC255AL-PFQX2639ZA-en.book Page 51 Friday, April 21, 2006 1:50 PM

Advertising