Panasonic CF-08 - Manual (Page 49)

49
Bluetooth
To enable Bluetooth
1 Double-tap on the desktop.
2 Double-tap [Bluetooth Device Properties].
3 Tap the [General] tab, and make the necessary settings.
4 Tap [Apply] (E) to reflect the settings.
To make connections with the serial port: Î page 50
To make connections with the dial-up network: Î page 51
A. Enable Bluetooth
Add the check mark for [Enable Blue-
tooth] to enable Bluetooth.
B. Serial Port / DialUp Network
Add the check mark for [Serial Port]
or [DialUp Network] to make connec-
tions with the serial port or dial-up
Network.
C. Bluetooth Name
Set the device name for Bluetooth.
D. Automatically enable bluetooth at
start-up
When you add the check mark for
[Automatically enable bluetooth at
start-up], Bluetooth will be enabled
when the system is started up.
E. Apply
(Î below)
CF-08.book 49 ページ ２００６年４月６日 木曜日 午後６時３８分