Panasonic CF-08 - Manual (Page 50)

50
Bluetooth
„ To make connections with the serial port
Tap the [Serial Port] tab, and make the following procedure.
A Turn on the Bluetooth device.
B Tap [Select Device] (A).
z
If you add the check mark for [Auto Reconnect] (C), the connection will
be made automatically when Bluetooth is enabled.
C Tap [Search] (D).
D Tap the Bluetooth device name you want to connect from the list box (E).
E Tap (F).
F Tap [Connect] (B).
When the [Enter PIN code] screen appears, enter the pin code, and then tap
[OK].
When the connection is active, the [Status] display shows “Connected.”
z
To terminate the connection
Tap [Disconnect] from the [Serial Port] tab.
When the connection is broken, the [Status] display shows “Not con-
nected.”
CF-08.book 50 ページ ２００６年４月６日 木曜日 午後６時３８分