Philips BDP7500S2 - Manual (Page 8)

8
1 Connect an HDMI cable (not supplied) to:
the • HDMI jack on this product.
the HDMI input jack on the TV. •
Tip
If the TV has a DVI connector only, connect via an HDMI/ •
DVI adaptor. Connect an audio cable for sound output.
If there is a blank screen under HDMI connection, on the
•
remote control press and then press “731” (numeric
buttons) to recover picture display.
If this product connects to a TV compatible with 1080p
•
or 1080p/24Hz, Philips recommends HDMI category 2
cable, also known as High Speed HDMI cable, for optimal
video and audio output.
To play the digital video images of a BD-video or DVD-
•
video via an HDMI connection, it is necessary that both
this product and the display device (or an AV receiver/
amplifier) support a copyright protection system called
HDCP (high-bandwidth digital content protection system).
This type of connection provides best picture quality.
•
Option 2: Connect to the component
video jack
1 Connect the component video cables
(not supplied) to:
the • Y Pb/Cb Pr/Cr jacks on this product.
the COMPONENT VIDEO input jacks •
on the TV.
2 Connect the audio cables to:
the • LINE OUT/AUDIO -L/R jacks on
this product.
the AUDIO input jacks on the TV.
•
Tip
The component video input jack on the TV might be •
labeled as Y Pb Pr or YUV.
Pb Y Pr
AUDIO IN
w Color buttons
• BD: Select tasks or options.
x HDMI
Select the video resolution of HDMI output. •
y REPEAT
Select repeat play or shuffle play. •
3 Connect
Make the following connections to use this product.
Basic connections:
Video •
Audio •
Power •
Optional connections:
Route audio to other devices •
HDMI-compliant AV receiver/amplifier •
Multi-channel AV amplifier/receiver •
Digital AV amplifier/receiver •
Analog stereo system •
USB device
•
Wired/Wireless network •
Note
Refer to the type plate at the back or bottom of the •
product for identification and supply ratings.
Before you make or change any connections, ensure that
•
all the devices are disconnected from the power outlet.
Connect video/audio cables
Select the best video connection that the TV can
support.
•
Option 1: Connect to the HDMI jack (for a
HDMI, DVI or HDCP-compliant TV).
• Option 2: Connect to the component video
jacks (for a standard TV or Progressive Scan TV).
• Option 3: Connect to the composite video
jack (for a standard TV).
Option 1: Connect to the HDMI jack
HDMI IN
EN