Pride Mobility Wrangler - Manual (Page 31)

31 Wrangler www.pridemobility.com
V I . C O M F O R T A D J U S T M E N T S
LUMBAR
SUPPORT
ADJUSTMENT
DIAL
HEADREST
SEATBACK
ADJUSTMENT
LEVER
Figure 12. Seatback and Headrest Adjustments
HIGH-BACK SEAT HEADREST ADJUSTMENT
If your PMV is equipped with a high-back seat, the head-
rest height can be adjusted to several positions.
1. Pulling up on the headrest will raise its position. See
figure 12.
2. Pushing down on the headrest will lower its position.
3. Pulling the headrest forward or pushing it backward
will adjust it to several positions.
SEATBACK ADJUSTMENT
To adjust your PMV’s reclining seat, perform these steps
(see figure 12):
1. While pulling up on the seatback adjustment lever, lean
forward or backward to adjust the seatback.
2. Release the seatback adjustment lever once the seat is
in a comfortable riding position.
LUMBAR SUPPORT ADJUSTMENT DIAL
The lumbar support is inside the lower part of the seatback.
Turn the lumbar support adjustment dial counterclockwise to
move the support into a comfortable position. See figure 12.
SEAT ROTATION
LEVER
SEAT SLIDING
LEVER
Figure 13. Sliding Seat Adjustment
WARNING! Always keep your back
pressed firmly against the seatback while
adjusting the angle.
WARNING! Do not operate the PMV with
the seat in the reclined position.
FRONT-TO-BACK SEAT ADJUSTMENT
You can reposition the PMV’s seat forward or rearward to adjust the distance between the seat and the
tiller. See figure 13.
1. Pull up on the seat sliding lever.
2. While holding the lever up, slide the seat forward or rearward.
3. Release the seat sliding lever once the seat is in the desired position.
SEAT ROTATION ADJUSTMENT
The seat rotation lever secures the seat in one of four positions. See figure 13.
1. Push down on the seat rotation lever to disengage the seat.
2. Rotate the seat to the desired position.
3. Release the seat rotation lever to secure the seat in place.