Panasonic DVD-LX9 - Manual (Page 40)

40
RQT6915
Advanced Operations
Changing settings
Menus
Audio
Display
Items
Speaker Setting (Analog connection)
Choose the settings to suit your audio system and the listening environment.
Multi-channel: when 3 or more speakers are connected (
➡ right).
2-channel: when 2 speakers or an amplifier with a Dolby Pro Logic decoder is
connected.
PCM Down Conversion (Digital connection)
Select how to output audio with a sampling frequency of 96 kHz or 88.2 kHz.
Select “Yes” if the equipment you connect cannot process signals with a sampling
frequency of 96 kHz or 88.2 kHz.
No:
Output as 96 kHz or 88.2 kHz.
Yes: Converted to 48 kHz or 44.1 kHz.
≥ Signals are converted to either 48 kHz or 44.1 kHz despite the above settings if the
signals have a sampling frequency of over 96 kHz, or the disc has copy protection.
≥ Some equipment cannot handle sampling frequencies of 88.2 kHz, even if they can
handle 96 kHz. Read your equipment’s operating instructions for details.
Dolby Digital (Digital connection)
Select “Bitstream” if the equipment can decode the signal.
Bitstream
PCM
DTS Digital Surround (Digital connection)
Select “Bitstream” if the equipment can decode the signal.
PCM
Bitstream
MPEG § 1 (Digital connection)
Select “Bitstream” if the equipment can decode the signal.
PCM
Bitstream
Dynamic Range Compression (Dolby Digital Only)
Change the dynamic range for late night viewing.
Off
On
Audio during Search § 2
Choose whether to have sound during search.
On
Off
§ 1 [For\Asia] MPEG is not available.
§ 2 Audio will be heard when playing some DVD-Audio despite the settings you make
here.
Menu Language
Choose the preferred language for these menus and the on-screen messages.
[For\the\United\Kingdom\and\Continental\Europe\
English Français Deutsch Italiano Español Português Svenska Nederlands
[For\Asia]
English
Français Espanõl
On-Screen Messages
Choose whether to show on-screen messages or not.
On
Off
IMPORTANT (Dolby Digital/DTS Digital Surround/MPEG § 1 )
If the equipment cannot decode the signal, the setting must be changed to
PCM. If not, signals the equipment cannot process will be output, causing
high levels of noise which can damage your hearing and the speakers.