4 mounting station – Philips STREAMIUN WACS7500 User Manual
Page 100
18.1.3 Preparation
Try the necessary rear connections and the Wi-Fi connections between
AND
in order to
find a suitable location for installation/mounting (see 3 Installation).
18.1.4 Mounting Station
You can mount Station to the wall using the provided bracket.
1
Align the bracket in the chosen location on a wall. Use a pencil to mark the drilling positions.
2
Drill the holes as marked.
3
Fix the bracket to the wall using suitable screws (not provided) and wall anchors (not provided)
for all the holes provided in the wall mounting bracket.
4
Use a screwdriver and fasten the supplied screws to
as shown.
5
Hook / mount
in place as shown.
Important!
To avoid the risk of injury and damage to property as well as to the product:
• Check for supply lines (gas, water, electricity, etc.) before drilling holes.
• Assess the type of screws necessary to bear Station.
• Choose the right drill and bit for the type of wall to drill the holes.
• Take all other precautions to be observed when carrying out this type of mounting/installation
job.
Appendix
96