Philips STREAMIUN WACS7500 - Manual (Page 79)

Network settings 75
ENGLISH
6 In Set IP Mode screen: If you are using a DHCP* enabled network device, select Automatic.
* DHCP stands for Dynamic Host Configuration Protocol. It is a protocol for assigning dynamic IP
addresses to devices on a network.
11.3.2 Set network on Station ( )
If there is no DHCP:
1
Select Static and assign an IP address and subnet mask as prompted, using the alphanumeric
keys (see 4.4 Prepare: Alphanumeric keys).
2 As prompted, select YES to apply the settings.
> is connected to the external wired network.
On the display, the icon changes to .
Applicable if you already have a wired home network (hub/switch/router).
Tip
You can connect or directly to your PC using the supplied Ethernet cable and the
Wireless Audio Device Manager (WADM) in the supplied PC Suite CD. For details, see section
12 Connect to your PC.
Wired
Router
www